Free shipping in Germany from €100, except pipes shipped by freight
English
Account WishlistCart

How much does home ventilation cost? Purchase, installation and running costs

Lüftung · 20. November 2026 · 5 min read · Editorial team Wohnungstechnik

WANAS Classic ventilation unit with heat recovery for central home ventilation, guide home ventilation costs

Controlled home ventilation provides fresh air, protects against moisture and mould and, with a heat exchanger, recovers a large part of the heat from the extract air. Before deciding, however, the same question almost always comes up: how much does home ventilation cost to buy, install and run?

There is no blanket answer, because buildings, systems and effort vary widely. In this guide we show which cost blocks arise, what orders of magnitude cost overviews from energy advice portals and building societies quote and how to keep costs under control. For your project you will always need a specific quote from a contractor.

The three cost blocks at a glance

The cost of home ventilation is made up of three parts:

  • Units and materials: ventilation unit or individual units, ducts, valves, silencers, wall sleeves, controls.
  • Planning and installation: ventilation concept, installation, electrical connection, balancing, commissioning. Retrofits add drilling, plastering and decorating.
  • Operation: electricity for the fans, replacement filters and regular servicing.

How the proportions of these blocks shift depends mainly on whether it is a new build or a retrofit and whether a central or a decentralised system is chosen.

Central system: cost range

A central system consists of a ventilation unit with heat exchanger and a duct network that supplies all rooms. Cost overviews quote roughly 5,000 to 20,000 euros for a detached house including installation. The wide range is explained by the size of the house, the quality of the unit and above all the installation effort. In new builds, ducts can be planned into ceilings and walls; retrofitting existing buildings is considerably more complex, which is why costs there tend towards the upper end of the range.

For flats the effort is lower because fewer rooms and shorter ducts are needed. A compact flat unit costs less than a unit for a whole house. Units for flats and houses are available in our central ventilation systems category.

Decentralised ventilation: cost range

Decentralised units are installed directly in the external wall and do not need a duct network. Costs therefore arise mainly per unit or per room. Depending on the source, a few hundred to around 1,600 euros are quoted for a unit with heat recovery including installation. For a flat or house this quickly adds up to a total in the mid four figure range, depending on the number of rooms.

The advantage lies in the lower construction effort. In occupied existing buildings in particular, this is often the decisive cost factor. How installation works is shown in our guide Retrofitting decentralised ventilation. Which system is fundamentally the better fit is compared in our guide Central or decentralised ventilation.

Running costs: electricity, filters and servicing

The fans in modern units use EC motors and need comparatively little electricity in normal operation. Actual consumption depends on airflow, duct network and fan setting. A detailed calculation can be found in our guide How much electricity does a ventilation system use.

Filters are usually changed once or twice a year, more often in areas with a lot of dust or pollen. The cost depends on the unit and the filter class. In addition, regular servicing checks the heat exchanger, fans and condensate drain. You can do many tasks yourself if the unit is easily accessible. An overview is provided by the maintenance plan for ventilation systems.

Cost itemWhat it depends on
ElectricityAirflow, fan setting, pressure loss in the duct network
Replacement filtersFilter class, change interval, unit type
ServicingDIY or contractor, accessibility of the unit

Grants and saving tips

Ventilation systems with heat recovery in existing buildings can be funded as an individual measure under the German federal funding for efficient buildings (BEG). So far, the basic grant for building services was 15 percent of eligible costs, with an additional 5 percent bonus if the measure is part of an individual renovation roadmap. As of November 2026. Because funding is adjusted regularly, check the current conditions with BAFA before placing an order. More on this in our guide BEG funding for individual measures.

Other ways to reduce costs: plan the ventilation together with other work, such as facade insulation or new windows. Obtain several quotes and compare them on the basis of the same airflows. And choose a unit that does not run at its limit in everyday use, as this saves electricity and noise.

What to look for when comparing quotes

Quotes for ventilation systems are often hard to compare because they include different services. Make sure every quote is based on the same airflow per room and check whether the ventilation concept, balancing and commissioning are included. Also check whether silencers, valves, wall sleeves and condensate connection are included or will be charged separately later.

With decentralised units it is worth looking at the number of units and at the setting at which the planned airflow is reached. A cheap quote with few units that run permanently at a high setting is often louder in everyday use and uses more electricity. Also ask about the cost and availability of replacement filters, as these arise over the entire service life. A transparent quote lists all items individually and makes clear which work has to be done on site by the client.

Frequently asked questions

Does home ventilation pay off financially?

Heat recovery reduces ventilation heat losses. Whether the system pays off depends on investment, energy prices and the building. Many users choose it mainly for air quality and moisture protection.

Is the decentralised solution always cheaper?

With few rooms and in retrofits, often yes. In larger houses a central system can keep up when calculated per room, especially in new builds.

Can I save costs by doing work myself?

Preparatory work and filter changes, yes. Planning, balancing and electrical connection belong in the hands of a contractor, especially as funding usually requires professional installation.

Conclusion

The cost of home ventilation depends mainly on the system and the installation effort. Central systems in a detached house range roughly between 5,000 and 20,000 euros, while decentralised units are priced per room and are often simpler to retrofit. On top of this come manageable running costs for electricity, filters and servicing. Check the current funding and compare quotes based on the same airflows. Units, filters and accessories are available in our central ventilation systems category.

Written by Editorial team Wohnungstechnik

Specialist retailer for ventilation, heating, solar and plumbing, Stuttgart. Based on manufacturer documents, standards and data sheets. How we work →

Recommendations

Our recommendations

Selected brand-name products for ventilation, filters, heating and plumbing, ready to order.

All recommendations
Installation partner advising a couple on their new heating and hot water system
2,300+products from 25+ brands

Why Wohnungstechnik

Your specialist dealer for ventilation, heating & plumbing

Selected manufacturers, honest advice and delivery straight from the manufacturer.

  • Genuine manufacturer goods

    From Blauberg, S&P, Nilan, Frico, Sanha and more: original goods from the manufacturer.

  • Installation by partner companies

    On request, our installation partners install, mount and service your system on site.

  • Personal expert advice

    Help with selection, sizing and spare parts, by phone and email.

  • Direct from the manufacturer

    Delivery time shown for each product, many items in 5 to 10 working days, free shipping in Germany from €100 (except pipes shipped by freight).

Brand partners

Shop by brand

We work directly with leading manufacturers. Choose your brand and see the full range.

Become a partner
BRUNE: Luftbefeuchter, Luftentfeuchter und ZubehörKesanitär: Kpress Edelstahl-PressfittingszencQ: Heizkreisverteiler und Armaturen für FußbodenheizungNKS: insulated copper pipe and refrigeration copper pipeStadler Form: Luftbefeuchter & Luftentfeuchterfothermo: Solar-Hybridboiler & SolarheizstäbeAFPRO Filters: air filters & filter solutionsAqua-Scope: leak protection & water sensorsBlauberg Ventilatoren: ventilation systemsDospel: bathroom fans & ventilatorsErich Huber: brand logoFAR: heating & plumbing valvesFischbach: fans & air technologyFrico: air curtains & heating technologyHeatness: infrared heating systemsHeizkraft: buffer and heat pump tanksInoxAir: ventilation systems & stainless steel componentsLuftuj: LUFTOMET air outlets & LUFTooL ventilation accessoriesNilan: ventilation & heat pump systemsNordic Fos: underfloor heating panels & accessoriesRESOL: solar & heating controllersS&P Deutschland: fans & ventilation systemsSANHA: piping systems and connection technologySENOR: sound insulation & vibration dampingTWL: drinking water, solar and heat pump tanksWANAS: ventilation units with heat recoveryZilio Aquasystem: expansion vessels

Contact

How can we help you?

Product question, quote for a project or spare part: write to us, we will get back to you as soon as possible.

Your topic

Your data is processed only to answer your request. Privacy policy