Sanha | SKU: 6703011

Sanha Heavy Steel Press Cap

Name: Sanha Heavy Steel Press Cap
Brand: Sanha
SKU: 6703011
Price: 21.49 EUR
Availability: InStock

21^{49 €}

Tax included Shipping calculated at checkout.

● Delivery time: 5 to 10 business days
● Shipping: Germany €4.99, free from €100; EU €19.99

✓ Original goods from the manufacturer
✓ Expert advice from building services specialists
✓ Pay by PayPal, card, Klarna or bank transfer
✓ Invoice with VAT shown separately

Size

Product variants

Bank transfer

You can also pay by bank transfer (prepayment). Bank details follow with the order confirmation.

Description

Sanha Heavy Steel Press cap is a cap with a press end for closing a pipe. The item belongs to the SANHA Heavy Steel Press press fitting system (series 70000) for thick-walled steel pipes and, according to Sanha, is made of unalloyed steel, galvanised on the outside. According to Sanha, the fitting carries a symbol indicating that it is not permitted for drinking water.

Technical data

System	SANHA Heavy Steel Press, series 70000, catalogue number 70301
Design	cap with press end
Material	unalloyed steel, material no. 1.0034 (E195) according to EN 10305-2 and EN 10305-3, galvanised on the outside (according to Sanha)
Sealing ring	EPDM, black, factory-fitted
Nominal pressure	PN 16, technical gases 16 bar (according to Sanha)
Max. continuous temperature	-30 to 120 °C (according to Sanha)
Press tool	up to 2 inches with press jaws of the MP original profile (according to Sanha)
Dimensions	1/2 to 2 inches
Suitable pipes	black steel pipes according to EN 10255, EN 10220 with EN 10217-1 and EN 10220 with EN 10216-1 (Sanha recommendation); also industrially coated and powder-coated steel pipes according to EN 10255 and steel pipes according to ASTM A53, A106, A135 and A795 (according to Sanha)

Dimensions in mm according to the Sanha Heavy Steel Press installation dimensions data sheet, DN as nominal size; the column designations correspond to the data sheet (z Z dimension).

Table 70301/71301 end cap:

Size	Article number	DN	ET	L	z
P 1/2	67030112	15	28	35	6
P 3/4	67030134	20	31	38	7
P 1	6703011	25	35	43	8
P 1 1/4	670301114	32	47	55	8
P 1 1/2	670301112	40	49	58	8
P 2	6703012	50	50	61	10

Features

Areas of application according to Sanha: closed heating and cooling systems, compressed air (dry, residual oil content up to 25 mg/m³) and technical gases.
Marking on the fitting according to Sanha: manufacturer, dimension, black "not for drinking water" symbol and a sticker "Please remove after pressing".
Leak path feature: connections accidentally left unpressed are detected during the leak test. Sanha states test pressures of 1 to 6.5 bar with water or 150 mbar to 3 bar with air for this.

Installation notes

According to the Sanha installation information, polish and clean the pipe up to the intended insertion depth with a suitable fleece, measure the insertion depth and mark it on the pipe; minimum distance to weld seams 3 x D, at least 100 mm.
After pressing, remove the control sticker; this marks the press connector as pressed. Then check the correct insertion depth (according to Sanha).
In the case of permanent moisture or corrosive additives in building materials or the atmosphere, a waterproof and pore-free corrosion protection according to AGI Q 151 (two-component systems) is required according to Sanha.

Note on variants

Select the size. The size states the nominal size in inches.

Data sheets and manuals (PDF)

Note on reviews: Any visitor can submit a review using the form; a purchase is not required. Anyone who submits a review receives an email to confirm their email address. Reviews marked “Verified” come from customers who bought the product from us. We do not check other reviews for a purchase.

Recommendations