Sanha | SKU: 6710401

Sanha Heavy Steel Press Gas Bend 45°

Name: Sanha Heavy Steel Press Gas Bend 45°
Brand: Sanha
SKU: 6710401
Price: 29.99 EUR
Availability: InStock

29^{99 €}

Tax included Shipping calculated at checkout.

● Delivery time: 5 to 10 business days
● Shipping: Germany €4.99, free from €100; EU €19.99

✓ Original goods from the manufacturer
✓ Expert advice from building services specialists
✓ Pay by PayPal, card, Klarna or bank transfer
✓ Invoice with VAT shown separately

Size

Product variants

Bank transfer

You can also pay by bank transfer (prepayment). Bank details follow with the order confirmation.

Description

Sanha Heavy Steel Press Gas bend 45° is a 45° bend with press end. The item belongs to the SANHA Heavy Steel Press Gas press fitting system (series 71000) for thick-walled steel pipes and, according to Sanha, is made of unalloyed steel, galvanised on the outside. According to Sanha, the system is intended for gas installations.

Technical data

System	SANHA Heavy Steel Press Gas, series 71000, catalogue number 71040 (P x FTG) and 71041 (P x P)
Design	bend 45° with press end
Material	unalloyed steel, material no. 1.0034 (E195) according to EN 10305-2 and EN 10305-3, galvanised on the outside (according to Sanha)
Sealing ring	HNBR, yellow, factory-fitted
Max. operating pressure	natural gas 5 bar, technical gases 16 bar (according to the Sanha technical submittal)
Press tool	up to 2 inches with press jaws of the MP original profile (according to Sanha)
Dimensions	1/2 to 2 inches
Suitable pipes	black steel pipes according to EN 10255, EN 10220 with EN 10217-1 and EN 10220 with EN 10216-1 (Sanha recommendation); also industrially coated and powder-coated steel pipes according to EN 10255 and steel pipes according to ASTM A53, A106, A135 and A795 (according to Sanha)

Dimensions in mm according to the Sanha Heavy Steel Press installation dimensions data sheet, DN as nominal size; the column designations correspond to the data sheet (z Z dimension).

Table 70040/71040 bend 45° (A x I):

Size	Article number	DN	d2	a	ET	z	b	b1
P x FTG 1/2	67104012	15	21.3	41	29	12	48	15
P x FTG 3/4	67104034	20	26.7	46	31	14	53	18
P x FTG 1	6710401	25	33.4	56	35	20	63	25
P x FTG 1 1/4	671040114	32	42.2	71	47	25	79	28
P x FTG 1 1/2	671040112	40	48.3	77	50	27	84	31
P x FTG 2	6710402	50	60.3	82	51	31	89	34

Table 70041/71041 bend 45° (I x I):

Size	Article number	DN	b	ET	z
P x P 1/2	67104112	15	41	29	12
P x P 3/4	67104134	20	46	31	14
P x P 1	6710411	25	56	35	20
P x P 1 1/4	671041114	32	71	47	24
P x P 1 1/2	671041112	40	77	50	27
P x P 2	6710412	50	82	51	31

Features

Areas of application according to Sanha: natural gases, liquefied gases, flammable gases, heating oil and fuels, compressed air (dry), nitrogen and technical gases.
Marking on the fitting according to Sanha: manufacturer, dimension, DVGW approval mark, yellow GAS marking MOP 5 GT/5 and a sticker "Please remove after pressing".
Leak path feature: connections accidentally left unpressed are detected during the leak test. Sanha states test pressures of 150 mbar to 3 bar with air for this.
DVGW type examination certificate DG-4550DN0663 for SANHA Heavy Steel Press Gas press connectors for metallic gas pipes (test basis DVGW G 5614), nominal sizes 1/2 to 2 inches with max. operating pressure 5 bar, valid until 19.12.2027. According to the certificate, the certification is based on press tools from NovoPress.

Installation notes

According to the Sanha installation information, polish and clean the pipe up to the intended insertion depth with a suitable fleece, measure the insertion depth and mark it on the pipe; minimum distance to weld seams 3 x D, at least 100 mm.
After pressing, remove the control sticker; this marks the press connector as pressed. Then check the correct insertion depth (according to Sanha).
In the case of permanent moisture or corrosive additives in building materials or the atmosphere, a waterproof and pore-free corrosion protection according to AGI Q 151 (two-component systems) is required according to Sanha.

Note on variants

Select the size. The size states the connection type and the nominal size in inches: P x P means press ends on both sides, P x FTG a press end and a male plain end.

Data sheets and manuals (PDF)

Note on reviews: Any visitor can submit a review using the form; a purchase is not required. Anyone who submits a review receives an email to confirm their email address. Reviews marked “Verified” come from customers who bought the product from us. We do not check other reviews for a purchase.

Recommendations