{"title":"Underfloor Heating","description":"\u003cp\u003eUnderfloor heating distributes heat over a large floor area and therefore works with low flow temperatures. This suits heat pumps and condensing boilers well. In this category you will find components for new builds and renovation projects: from insulation and system boards to distribution in the plant room.\u003c\/p\u003e\n\u003ch2\u003eDry construction system from Nordic Fos\u003c\/h2\u003e\n\u003cp\u003eNordic Fos supplies XPS 500 underfloor heating boards with aluminium foil for heating pipes of 12, 16 and 20 mm, as well as boards for electric heating cables. The range also includes XPS insulation boards as a base layer, impact sound insulation with moisture barrier, primer, assembly adhesive and parquet adhesive, plus a router bit for cutting additional pipe grooves on site. This method is particularly suitable where only a low installation height is available.\u003c\/p\u003e\n\u003ch2\u003eDistribution and control with FAR\u003c\/h2\u003e\n\u003cp\u003eOn the hydraulic side, FAR offers a pre-assembled manifold with flow meters for 3 to 10 heating circuits, as well as heating circuit sets with mixing valve and actuator or with fixed-value thermostatic mixer, each with a high-efficiency pump. The flow meters make it easier to adjust the individual circuits. A heating circuit set with mixing valve lowers the boiler temperature to the level the surface heating needs, so it is also suitable when radiators and underfloor heating run from the same heat source. Further valves and mixers are listed under \u003ca href=\"\/en\/collections\/heizungsarmaturen\"\u003eHeating Fittings\u003c\/a\u003e and in the \u003ca href=\"\/en\/collections\/far\"\u003eFAR\u003c\/a\u003e range.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions about underfloor heating\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many heating circuits do I need?\u003c\/summary\u003e\u003cp\u003eThat depends on room size, pipe length and layout. The number of circuits follows from the heat load calculation; the FAR manifold is available for 3 to 10 circuits.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes underfloor heating need hydraulic balancing?\u003c\/summary\u003e\u003cp\u003eYes, it is the only way to give each room the right amount of water. Background is provided in our article \u003ca href=\"\/en\/blogs\/news\/hydraulischer-abgleich-pflicht-2026\"\u003eHydraulic balancing\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich flow temperature makes sense?\u003c\/summary\u003e\u003cp\u003eAs low as possible while the rooms still get warm. Tips are given in \u003ca href=\"\/en\/blogs\/news\/vorlauftemperatur-senken-der-unterschatzte-effizienz-hebel\"\u003eLowering the flow temperature\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How many heating circuits do I need?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"That depends on room size, pipe length and layout. The number of circuits follows from the heat load calculation; the FAR manifold is available for 3 to 10 circuits.\"}}, {\"@type\": \"Question\", \"name\": \"Does underfloor heating need hydraulic balancing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, it is the only way to give each room the right amount of water. Background is provided in our article Hydraulic balancing.\"}}, {\"@type\": \"Question\", \"name\": \"Which flow temperature makes sense?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"As low as possible while the rooms still get warm. Tips are given in Lowering the flow temperature.\"}}]}\u003c\/script\u003e","products":[{"product_id":"far-verteiler-3561-vormontiert-mit-durchflussmessern-1-zoll","title":"FAR manifold 3561 pre-assembled with flow meters, 1 inch, 3 to 10 circuits","description":"\u003cp\u003e\u003cstrong\u003eFAR manifold 3561\u003c\/strong\u003e is a pre-assembled heating circuit manifold made of chrome-plated brass. It consists of a flow manifold with flow meters and flow regulators for balancing the circuits, a return manifold with shut-off valves designed for electrothermal actuators, the fittings art. 3438 and the metal bracket art. 7480.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable class=\"wt-kv\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003cth\u003eMaterial\u003c\/th\u003e\u003ctd\u003eBrass, chrome-plated\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eMain connections\u003c\/th\u003e\u003ctd\u003e1 inch (G 1 and Rp 1 according to dimensional sheet), lateral\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eOutlet spacing\u003c\/th\u003e\u003ctd\u003e50 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eFlow meters\u003c\/th\u003e\u003ctd\u003e0 to 5 l\/min\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eDepth\u003c\/th\u003e\u003ctd\u003e98 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eHeight\u003c\/th\u003e\u003ctd\u003e387 to 451 mm (adjustable bracket)\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\u003cth\u003eCode\u003c\/th\u003e\u003cth\u003eCircuits\u003c\/th\u003e\u003cth\u003eLength\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003e3561 103\u003c\/td\u003e\u003ctd\u003e3\u003c\/td\u003e\u003ctd\u003e213 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e3561 104\u003c\/td\u003e\u003ctd\u003e4\u003c\/td\u003e\u003ctd\u003e263 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e3561 105\u003c\/td\u003e\u003ctd\u003e5\u003c\/td\u003e\u003ctd\u003e314 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e3561 106\u003c\/td\u003e\u003ctd\u003e6\u003c\/td\u003e\u003ctd\u003e364 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e3561 107\u003c\/td\u003e\u003ctd\u003e7\u003c\/td\u003e\u003ctd\u003e414 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e3561 108\u003c\/td\u003e\u003ctd\u003e8\u003c\/td\u003e\u003ctd\u003e464 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e3561 109\u003c\/td\u003e\u003ctd\u003e9\u003c\/td\u003e\u003ctd\u003e515 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e3561 110\u003c\/td\u003e\u003ctd\u003e10\u003c\/td\u003e\u003ctd\u003e565 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlow manifold with flow meters and flow regulators for hydraulic balancing\u003c\/li\u003e\n\u003cli\u003eReturn manifold with shut-off valves for electrothermal actuators\u003c\/li\u003e\n\u003cli\u003eInterchangeable connections for copper, plastic and multilayer pipe\u003c\/li\u003e\n\u003cli\u003ePre-assembled with fittings art. 3438 and metal bracket art. 7480\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eElectrothermal actuators and pipe fittings for the circuits are not included.\u003c\/li\u003e\n\u003cli\u003eThe length is dimension C in the dimensional sheet.\u003c\/li\u003e\n\u003cli\u003eTechnical information according to the manufacturer FAR, details are given in the documents under Downloads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer: FAR Rubinetterie S.p.A., Via Morena 20, 28024 Gozzano (NO), Italy, info@far.eu, www.far.eu\u003c\/p\u003e","brand":"FAR","offers":[{"title":"3","offer_id":55445029257557,"sku":"3561 103","price":237.99,"currency_code":"EUR","in_stock":true},{"title":"4","offer_id":55445029290325,"sku":"3561 104","price":273.99,"currency_code":"EUR","in_stock":true},{"title":"5","offer_id":55445029323093,"sku":"3561 105","price":300.99,"currency_code":"EUR","in_stock":true},{"title":"6","offer_id":55445029355861,"sku":"3561 106","price":332.49,"currency_code":"EUR","in_stock":true},{"title":"7","offer_id":55445029388629,"sku":"3561 107","price":377.49,"currency_code":"EUR","in_stock":true},{"title":"8","offer_id":55445029421397,"sku":"3561 108","price":409.49,"currency_code":"EUR","in_stock":true},{"title":"9","offer_id":55445029454165,"sku":"3561 109","price":441.99,"currency_code":"EUR","in_stock":true},{"title":"10","offer_id":55445029486933,"sku":"3561 110","price":490.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1247\/2405\/files\/3561.jpg?v=1792426497"},{"product_id":"nordic-fos-fraeseisen-fuer-oberfraese-16-und-20-mm-rohr","title":"Nordic Fos router bit for 16 and 20 mm heating pipe","description":"\u003cp\u003e\u003cstrong\u003eNordic Fos router bit\u003c\/strong\u003e is a core box cutter for clamping into a router. It is used to mill additional grooves into the Nordic Fos underfloor heating panels, for example when an additional pipe has to be routed through.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable class=\"wt-kv\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003cth\u003eType\u003c\/th\u003e\u003ctd\u003ecore box cutter for router\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eCutter\u003c\/th\u003e\u003ctd\u003e19 mm for 16 mm pipe, 22 mm for 20 mm pipe\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eScope of delivery\u003c\/th\u003e\u003ctd\u003e1 piece\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor additional grooves in the Nordic Fos underfloor heating panels\u003c\/li\u003e\n\u003cli\u003eTwo sizes to match the heating pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical information according to the manufacturer Nordic Fos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer: Nordic Fos A\/S, A. P. Møllers Allé 55, 2791 Dragør, Denmark, info@nordicfos.com, www.nordicfos.com\u003c\/p\u003e","brand":"Nordic Fos","offers":[{"title":"for 16 mm pipe, 19 mm cutter","offer_id":55445391769941,"sku":"300016","price":48.49,"currency_code":"EUR","in_stock":true},{"title":"for 20 mm pipe, 22 mm cutter","offer_id":55445391802709,"sku":"300020","price":56.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1247\/2405\/files\/nordic-fos-fraeseisen.jpg?v=1792430057"},{"product_id":"nordic-fos-fussbodenheizungsplatten-xps-500-1200-x-600-mm","title":"Nordic Fos underfloor heating panels XPS 500 with aluminium foil, 1200 x 600 mm, for 12, 16 and 20 mm pipe","description":"\u003cp\u003e\u003cstrong\u003eNordic Fos underfloor heating panels\u003c\/strong\u003e are system panels for a water-based underfloor heating system in dry construction. They are made of XPS 500 with an aluminium foil that spreads the heat across the entire panel. The heating pipes are pressed into omega-shaped grooves, and every panel has an integrated return loop. According to the manufacturer, only one panel type is therefore needed for the whole area.\u003c\/p\u003e\n\u003cp\u003eAccording to the manufacturer, tiles, clinker, natural stone, parquet, laminate and design floors can be laid directly on the panels. With a low build-up height from 16 mm, the panels are also suitable for renovations.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable class=\"wt-kv\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003cth\u003eMaterial\u003c\/th\u003e\u003ctd\u003eXPS 500 (45 kg\/m³) with 0.1 mm aluminium foil\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003ePanel size\u003c\/th\u003e\u003ctd\u003e1200 x 600 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eLaying area per panel\u003c\/th\u003e\u003ctd\u003e0.72 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003ePanel height\u003c\/th\u003e\u003ctd\u003e16, 19 or 25 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eConsumption\u003c\/th\u003e\u003ctd\u003eapprox. 1.4 panels per m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eCompressive strength (10 % deformation)\u003c\/th\u003e\u003ctd\u003e500 kPa (50 t\/m²)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eThermal conductivity λD\u003c\/th\u003e\u003ctd\u003e0.033 W\/(mK)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eReaction to fire\u003c\/th\u003e\u003ctd\u003eClass E according to EN 13164\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eWater absorption\u003c\/th\u003e\u003ctd\u003emax. 1.0 % by volume\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eWeight per panel\u003c\/th\u003e\u003ctd\u003eapprox. 0.9 kg\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eCarton size\u003c\/th\u003e\u003ctd\u003e61 x 51 x 60.5 cm\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\u003cth\u003eCode\u003c\/th\u003e\u003cth\u003ePanel height\u003c\/th\u003e\u003cth\u003eHeating pipe\u003c\/th\u003e\u003cth\u003eGrooves\u003c\/th\u003e\u003cth\u003eCarton\u003c\/th\u003e\u003cth\u003eArea per carton\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003e121651\u003c\/td\u003e\u003ctd\u003e16 mm\u003c\/td\u003e\u003ctd\u003e12 mm\u003c\/td\u003e\u003ctd\u003e5, spacing 120 mm\u003c\/td\u003e\u003ctd\u003e14 panels\u003c\/td\u003e\u003ctd\u003e10.08 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e161941\u003c\/td\u003e\u003ctd\u003e19 mm\u003c\/td\u003e\u003ctd\u003e16 mm\u003c\/td\u003e\u003ctd\u003e4, spacing 150 mm\u003c\/td\u003e\u003ctd\u003e12 panels\u003c\/td\u003e\u003ctd\u003e8.64 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e162541\u003c\/td\u003e\u003ctd\u003e25 mm\u003c\/td\u003e\u003ctd\u003e16 mm\u003c\/td\u003e\u003ctd\u003e4, spacing 150 mm\u003c\/td\u003e\u003ctd\u003e10 panels\u003c\/td\u003e\u003ctd\u003e7.2 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e202531\u003c\/td\u003e\u003ctd\u003e25 mm\u003c\/td\u003e\u003ctd\u003e20 mm\u003c\/td\u003e\u003ctd\u003e3, spacing 200 mm\u003c\/td\u003e\u003ctd\u003e10 panels\u003c\/td\u003e\u003ctd\u003e7.2 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium foil across the entire panel for heat distribution\u003c\/li\u003e\n\u003cli\u003eOmega-shaped grooves hold the heating pipe after light pressure\u003c\/li\u003e\n\u003cli\u003eReturn loop in every panel, prepared with a utility knife\u003c\/li\u003e\n\u003cli\u003eCut to size with a utility knife; according to the manufacturer, the offcut can be used in the next row\u003c\/li\u003e\n\u003cli\u003eAccording to the manufacturer, designed for low flow temperatures of 30 to 32 °C, e.g. with a heat pump, geothermal or solar heat\u003c\/li\u003e\n\u003cli\u003eResponse time approx. 30 minutes according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eSupplied folded to 600 x 600 mm, made in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNote on variants\u003c\/h3\u003e\n\u003cp\u003eThe price applies per carton. The minimum order quantity is one carton per version; the area per carton is shown in the selection. The unit price per m² is shown with the price.\u003c\/p\u003e\n\u003cp\u003e16 mm panels are for 12 mm pipe, 19 and 25 mm panels with 4 grooves for 16 mm pipe, 25 mm panels with 3 grooves for 20 mm pipe. According to the manufacturer, panels for 20 mm pipe are mainly intended for industrial use or rooms of 100 m² and more.\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe subfloor must be load-bearing, firm, level and stable. Level any unevenness beforehand with self-levelling compound.\u003c\/li\u003e\n\u003cli\u003eUnder floating floors the panels can be laid loose. On timber subfloors they are fixed with 20 chipboard screws 4.5 x 40 mm per panel or with Nordic adhesive; on concrete they are bonded with Nordic adhesive or tile adhesive.\u003c\/li\u003e\n\u003cli\u003eWith 20 mm pipe (202531) the manufacturer recommends bonding all panels to the subfloor with Nordic adhesive.\u003c\/li\u003e\n\u003cli\u003eFor tiles, the panels are primed with Nordic Primer. The heating may only be switched on 3 to 4 weeks after grouting.\u003c\/li\u003e\n\u003cli\u003eUnder soft coverings such as vinyl, PVC, linoleum or carpet, a load-distributing board of 10 to 12 mm is required.\u003c\/li\u003e\n\u003cli\u003eRecommended circuit size for renovations according to the manufacturer: 12 mm pipe approx. 9 m² (90 m), 16 mm pipe approx. 15 m² (120 m), 20 mm pipe approx. 24 m² (160 m).\u003c\/li\u003e\n\u003cli\u003eDivide larger tiled areas with expansion joints; according to the data sheet, a single field may be no larger than 40 m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeating pipes, manifold and controls are not included. The manufacturer recommends 5-layer PE-RT pipes with EVOH.\u003c\/li\u003e\n\u003cli\u003eTechnical information according to the manufacturer Nordic Fos, details are given in the documents under Downloads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer: Nordic Fos A\/S, A. P. Møllers Allé 55, 2791 Dragør, Denmark, info@nordicfos.com, www.nordicfos.com\u003c\/p\u003e","brand":"Nordic Fos","offers":[{"title":"16 mm, for 12 mm pipe, carton of 14 panels (10.08 m²)","offer_id":55445394030933,"sku":"121651","price":562.49,"currency_code":"EUR","in_stock":true},{"title":"19 mm, for 16 mm pipe, carton of 12 panels (8.64 m²)","offer_id":55445394063701,"sku":"161941","price":481.99,"currency_code":"EUR","in_stock":true},{"title":"25 mm, for 16 mm pipe, carton of 10 panels (7.2 m²)","offer_id":55445394096469,"sku":"162541","price":401.99,"currency_code":"EUR","in_stock":true},{"title":"25 mm, for 20 mm pipe, carton of 10 panels (7.2 m²)","offer_id":55445394129237,"sku":"202531","price":401.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1247\/2405\/files\/nordic-fos-fussbodenheizungsplatte-121651.jpg?v=1792430091"},{"product_id":"nordic-fos-fussbodenheizungsplatten-fuer-elektrische-heizkabel-16-mm","title":"Nordic Fos underfloor heating panels for 7 mm electric heating cables, XPS 500, 16 x 600 x 1200 mm","description":"\u003cp\u003e\u003cstrong\u003eNordic Fos underfloor heating panels for heating cables\u003c\/strong\u003e are 16 mm system panels made of XPS 500 with aluminium foil for electric heating cables with a diameter of 7 mm. The manufacturer lists them as heating cable panels and as panels for ceiling cooling.\u003c\/p\u003e\n\u003cp\u003eAccording to the manufacturer, tiles, parquet and laminate can be laid directly on the panels. For vinyl, carpet or herringbone parquet, an intermediate board is required on top of the panel.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable class=\"wt-kv\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003cth\u003eMaterial\u003c\/th\u003e\u003ctd\u003eXPS 500 with aluminium foil\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003ePanel size\u003c\/th\u003e\u003ctd\u003e16 x 600 x 1200 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eLaying area per panel\u003c\/th\u003e\u003ctd\u003e0.72 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eHeating cable\u003c\/th\u003e\u003ctd\u003e7 mm diameter\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eCarton\u003c\/th\u003e\u003ctd\u003e15 panels (10.8 m²)\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\u003cth\u003eCode\u003c\/th\u003e\u003cth\u003eCable spacing\u003c\/th\u003e\u003cth\u003eGrooves\u003c\/th\u003e\u003cth\u003eCarton\u003c\/th\u003e\u003cth\u003eArea per carton\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003e071661\u003c\/td\u003e\u003ctd\u003e100 mm\u003c\/td\u003e\u003ctd\u003e6\u003c\/td\u003e\u003ctd\u003e15 panels\u003c\/td\u003e\u003ctd\u003e10.8 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e071681D\u003c\/td\u003e\u003ctd\u003e75 mm\u003c\/td\u003e\u003ctd\u003e8\u003c\/td\u003e\u003ctd\u003e15 panels\u003c\/td\u003e\u003ctd\u003e10.8 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrooves for 7 mm heating cables at a spacing of 100 mm or 75 mm\u003c\/li\u003e\n\u003cli\u003eAluminium foil for heat distribution\u003c\/li\u003e\n\u003cli\u003ePressure-resistant XPS 500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNote on variants\u003c\/h3\u003e\n\u003cp\u003eThe price applies per carton of 15 panels (10.8 m²). The minimum order quantity is one carton. The unit price per m² is shown with the price.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeating cables, thermostat and electrical connection are not included.\u003c\/li\u003e\n\u003cli\u003eAccording to the manufacturer, levelling and waterproofing in wet rooms are carried out in line with local requirements.\u003c\/li\u003e\n\u003cli\u003eTechnical information according to the manufacturer Nordic Fos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer: Nordic Fos A\/S, A. P. Møllers Allé 55, 2791 Dragør, Denmark, info@nordicfos.com, www.nordicfos.com\u003c\/p\u003e","brand":"Nordic Fos","offers":[{"title":"100 mm, 6 grooves, carton of 15 panels (10.8 m²)","offer_id":55445394882901,"sku":"071661","price":650.99,"currency_code":"EUR","in_stock":true},{"title":"75 mm, 8 grooves, carton of 15 panels (10.8 m²)","offer_id":55445394915669,"sku":"071681D","price":674.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1247\/2405\/files\/nordic-fos-heizkabelplatte-071661.jpg?v=1792430098"},{"product_id":"nordic-fos-xps-500-daemmplatte-1200-x-600-mm","title":"Nordic Fos XPS 500 insulation board 1200 x 600 mm, 16, 19, 25 and 50 mm, underlay for underfloor heating panels","description":"\u003cp\u003e\u003cstrong\u003eNordic Fos XPS 500 insulation board\u003c\/strong\u003e is a pressure-resistant XPS insulation board with a compressive strength of 500 kPa (50 t\/m²). According to the manufacturer, it is used as additional insulation or for the floor build-up under the Nordic Fos underfloor heating panels. With Nordic Fos adhesive it can be bonded to the subfloor and to other XPS boards.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable class=\"wt-kv\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003cth\u003eMaterial\u003c\/th\u003e\u003ctd\u003eXPS 500\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eCompressive strength\u003c\/th\u003e\u003ctd\u003e500 kPa (50 t\/m²)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eBoard size\u003c\/th\u003e\u003ctd\u003e1200 x 600 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eArea per board\u003c\/th\u003e\u003ctd\u003e0.72 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eThicknesses\u003c\/th\u003e\u003ctd\u003e16, 19, 25 and 50 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\u003cth\u003eCode\u003c\/th\u003e\u003cth\u003eThickness\u003c\/th\u003e\u003cth\u003eCarton\u003c\/th\u003e\u003cth\u003eArea per carton\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003e601600\u003c\/td\u003e\u003ctd\u003e16 mm\u003c\/td\u003e\u003ctd\u003e17 boards\u003c\/td\u003e\u003ctd\u003e12.24 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e601900\u003c\/td\u003e\u003ctd\u003e19 mm\u003c\/td\u003e\u003ctd\u003e14 boards\u003c\/td\u003e\u003ctd\u003e10.08 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e602500\u003c\/td\u003e\u003ctd\u003e25 mm\u003c\/td\u003e\u003ctd\u003e11 boards\u003c\/td\u003e\u003ctd\u003e7.92 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e605000\u003c\/td\u003e\u003ctd\u003e50 mm\u003c\/td\u003e\u003ctd\u003e5 boards\u003c\/td\u003e\u003ctd\u003e3.6 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePressure-resistant XPS 500 underlay for the build-up under underfloor heating panels\u003c\/li\u003e\n\u003cli\u003eSame board size as the Nordic Fos underfloor heating panels\u003c\/li\u003e\n\u003cli\u003eFour thicknesses for the required build-up height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNote on variants\u003c\/h3\u003e\n\u003cp\u003eThe price applies per carton. The minimum order quantity is one carton; the area per carton is shown in the selection. The unit price per m² is shown with the price.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe insulation board has no grooves for heating pipes. Where no heating is installed, for example under kitchen cabinets, the manufacturer uses the underfloor heating panels without inserting a pipe.\u003c\/li\u003e\n\u003cli\u003eTechnical information according to the manufacturer Nordic Fos, details are given in the documents under Downloads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer: Nordic Fos A\/S, A. P. Møllers Allé 55, 2791 Dragør, Denmark, info@nordicfos.com, www.nordicfos.com\u003c\/p\u003e","brand":"Nordic Fos","offers":[{"title":"16 mm, carton of 17 boards (12.24 m²)","offer_id":55445395079509,"sku":"601600","price":518.99,"currency_code":"EUR","in_stock":true},{"title":"19 mm, carton of 14 boards (10.08 m²)","offer_id":55445395112277,"sku":"601900","price":427.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm, carton of 11 boards (7.92 m²)","offer_id":55445395145045,"sku":"602500","price":353.49,"currency_code":"EUR","in_stock":true},{"title":"50 mm, carton of 5 boards (3.6 m²)","offer_id":55445395177813,"sku":"605000","price":315.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1247\/2405\/files\/nordic-fos-xps-daemmplatte.jpg?v=1792430104"},{"product_id":"nordic-fos-primer-800150-grundierung-fuer-fussbodenheizungsplatten","title":"Nordic Fos Primer 800150, primer for underfloor heating panels, carton of 3 buckets of 3 kg","description":"\u003cp\u003e\u003cstrong\u003eNordic Fos Primer\u003c\/strong\u003e is a quartz-sand-modified special primer for the aluminium foil of the Nordic Fos underfloor heating panels. According to the manufacturer, it ensures good adhesion of tile adhesive or levelling compound on the panels and works with any high-quality standard tile adhesive.\u003c\/p\u003e\n\u003cp\u003eOn absorbent substrates such as concrete, the primer can also be used as a conventional primer. In this case it is diluted with water at a ratio of 1:1 or 1:2.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable class=\"wt-kv\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003cth\u003eContainer\u003c\/th\u003e\u003ctd\u003e3 kg bucket\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eCarton content\u003c\/th\u003e\u003ctd\u003e3 buckets (9 kg)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eConsumption undiluted\u003c\/th\u003e\u003ctd\u003e250 to 300 g\/m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eDrying time\u003c\/th\u003e\u003ctd\u003e1 hour\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eClassification\u003c\/th\u003e\u003ctd\u003enot classified as hazardous under CLP (according to the safety data sheet)\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpecially developed for the aluminium foil of the Nordic Fos panels\u003c\/li\u003e\n\u003cli\u003eBase for tile adhesive, levelling compound and self-levelling compound\u003c\/li\u003e\n\u003cli\u003eDiluted, also usable as a primer on concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNote on variants\u003c\/h3\u003e\n\u003cp\u003eThe price applies per carton of 3 buckets of 3 kg. The unit price per kg is shown with the price.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContains isothiazolinones (EUH208), may produce an allergic reaction. Safety data sheet under Downloads.\u003c\/li\u003e\n\u003cli\u003eTechnical information according to the manufacturer Nordic Fos, details are given in the documents under Downloads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer: Nordic Fos A\/S, A. P. Møllers Allé 55, 2791 Dragør, Denmark, info@nordicfos.com, www.nordicfos.com\u003c\/p\u003e","brand":"Nordic Fos","offers":[{"title":"Carton of 3 buckets of 3 kg (9 kg)","offer_id":55445395964245,"sku":"800150","price":303.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1247\/2405\/files\/nordic-fos-primer-800150.jpg?v=1792430113"},{"product_id":"nordic-fos-xps-montagekleber-800000-290-ml","title":"Nordic Fos XPS mounting adhesive 800000, 290 ml cartridge white, carton of 12","description":"\u003cp\u003e\u003cstrong\u003eNordic Fos mounting adhesive\u003c\/strong\u003e is a neutral, low-odour one-component SMP adhesive for indoor use, free of phthalates and solvents. It is used to mount the Nordic Fos XPS underfloor heating panels and XPS insulation boards and, according to the manufacturer, forms a strong but elastic joint. According to the data sheet, suitable substrates are insulation materials, wood, plywood, masonry, concrete and most metals and plastics.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable class=\"wt-kv\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003cth\u003eType\u003c\/th\u003e\u003ctd\u003eSMP, one-component\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eColour\u003c\/th\u003e\u003ctd\u003ewhite\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eContent per cartridge\u003c\/th\u003e\u003ctd\u003e290 ml\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eCarton content\u003c\/th\u003e\u003ctd\u003e12 cartridges (3.48 l)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eConsumption\u003c\/th\u003e\u003ctd\u003e2 to 3 m² per cartridge, depending on dimensions and required strength\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eApplication temperature\u003c\/th\u003e\u003ctd\u003e+5 °C to +40 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eOpen time\u003c\/th\u003e\u003ctd\u003ework within 8 minutes after application\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eCuring\u003c\/th\u003e\u003ctd\u003eapprox. 2 mm per day, depending on humidity and temperature\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eHardness\u003c\/th\u003e\u003ctd\u003eapprox. 60 Shore A (ISO 868)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eTensile strength\u003c\/th\u003e\u003ctd\u003e3.0 N\/mm² (ISO 37)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eElongation\u003c\/th\u003e\u003ctd\u003e200 % (ISO 37)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eTemperature resistance\u003c\/th\u003e\u003ctd\u003eapprox. -40 °C to +90 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003ePaintable\u003c\/th\u003e\u003ctd\u003eyes\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eShelf life\u003c\/th\u003e\u003ctd\u003eunopened 24 months when stored cool and dry\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor mounting XPS underfloor heating panels and XPS insulation boards\u003c\/li\u003e\n\u003cli\u003eNeutral and low-odour, free of phthalates and solvents\u003c\/li\u003e\n\u003cli\u003eElastic joint, paintable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNote on variants\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer only supplies the adhesive by the carton; the price applies per carton of 12 cartridges. The unit price per litre is shown with the price.\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe bonding surfaces must be clean, dry and free of grease, dust and loose particles.\u003c\/li\u003e\n\u003cli\u003eThe adhesive is applied in beads to the substrate or to the materials to be bonded.\u003c\/li\u003e\n\u003cli\u003eFor tiles, clinker or design floors, the adhesive is applied according to the installation guide in at least 4 beads per panel along the full length, 5 mm wide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccording to the safety data sheet, harmful to aquatic life with long lasting effects (H412). Please avoid release to the environment.\u003c\/li\u003e\n\u003cli\u003eTechnical information according to the manufacturer Nordic Fos, details are given in the data sheet and safety data sheet under Downloads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer: Nordic Fos A\/S, A. P. Møllers Allé 55, 2791 Dragør, Denmark, info@nordicfos.com, www.nordicfos.com\u003c\/p\u003e","brand":"Nordic Fos","offers":[{"title":"Carton of 12 cartridges of 290 ml","offer_id":55445397733717,"sku":"800000","price":260.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1247\/2405\/files\/nordic-fos-xps-kleber-800000.jpg?v=1792430119"},{"product_id":"nordic-fos-parkettkleber-800500-14-kg","title":"Nordic Fos parquet adhesive 800500, fast curing and elastic, 14 kg bucket (10 l)","description":"\u003cp\u003e\u003cstrong\u003eNordic Fos parquet adhesive\u003c\/strong\u003e is a fast-curing, elastic parquet adhesive for bonding parquet directly onto the Nordic Fos underfloor heating panels. According to the manufacturer, it requires no primer, has impact sound reducing properties and is suitable for all types of parquet, including herringbone and strip parquet.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable class=\"wt-kv\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003cth\u003eContainer\u003c\/th\u003e\u003ctd\u003eplastic bucket 10 l, 14 kg\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eConsumption\u003c\/th\u003e\u003ctd\u003eat least 1 l\/m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eColour\u003c\/th\u003e\u003ctd\u003elight brown\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eClassification\u003c\/th\u003e\u003ctd\u003enot classified as hazardous under CLP (according to the safety data sheet)\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor parquet directly on the Nordic Fos underfloor heating panels\u003c\/li\u003e\n\u003cli\u003eNo primer required according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eFast curing and elastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNote on variants\u003c\/h3\u003e\n\u003cp\u003eThe price applies per 14 kg bucket. The unit price per kg is shown with the price.\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use on substrates with increased residual moisture. The flatness of the substrate must generally correspond to class 2A with ± 2 mm over a 2 m measuring length.\u003c\/li\u003e\n\u003cli\u003eAfter laying the panels and pipes, clean the surface with a cotton cloth, then bond the floor covering directly with the parquet adhesive. Observe the temperature and humidity requirements of the floor manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContains trimethoxyvinylsilane and 1-o-tolylbiguanide (EUH208), may produce an allergic reaction. Small amounts of methanol are released during curing. Safety data sheet under Downloads.\u003c\/li\u003e\n\u003cli\u003eTechnical information according to the manufacturer Nordic Fos, details are given in the documents under Downloads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer: Nordic Fos A\/S, A. P. Møllers Allé 55, 2791 Dragør, Denmark, info@nordicfos.com, www.nordicfos.com\u003c\/p\u003e","brand":"Nordic Fos","offers":[{"title":"Bucket 14 kg (10 l)","offer_id":55445397864789,"sku":"800500","price":423.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1247\/2405\/files\/nordic-fos-parkettkleber-800500.jpg?v=1792430125"},{"product_id":"nordic-fos-nordicflex-trittschalldaemmung-1-6-mm","title":"Nordic Fos NordicFlex impact sound underlay 1.6 mm with moisture barrier, pack of 6 m²","description":"\u003cp\u003e\u003cstrong\u003eNordic Fos NordicFlex\u003c\/strong\u003e is a 1.6 mm thin impact sound underlay made of XPS and PET that is laid on the Nordic Fos underfloor heating panels under floating laminate or parquet. According to the data sheet, it combines underlay and vapour barrier in one, lies firm and stable and needs no additional sealing tape. Pre-printed cutting lines make cutting easy.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable class=\"wt-kv\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003cth\u003eMaterial\u003c\/th\u003e\u003ctd\u003eXPS\/PET\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eThickness\u003c\/th\u003e\u003ctd\u003e1.6 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eDimensions\u003c\/th\u003e\u003ctd\u003e5,100 x 1,180 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eContent per pack\u003c\/th\u003e\u003ctd\u003e6 m²\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eScope of delivery\u003c\/th\u003e\u003ctd\u003e1 pack (6 m²)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eSurface\u003c\/th\u003e\u003ctd\u003ealuminium coloured\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eImpact sound reduction\u003c\/th\u003e\u003ctd\u003eup to 19 dB according to the manufacturer\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eRoom sound\u003c\/th\u003e\u003ctd\u003eup to 14 % improvement according to the manufacturer\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eCompressive strength\u003c\/th\u003e\u003ctd\u003eup to 90 kPa (CS2) according to the manufacturer\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eLevelling of unevenness\u003c\/th\u003e\u003ctd\u003eup to 1.2 mm (PC2) according to the manufacturer\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eReaction to fire\u003c\/th\u003e\u003ctd\u003eaccording to EN 13501\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eUnderfloor heating\u003c\/th\u003e\u003ctd\u003esuitable\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUnderlay and vapour barrier in one\u003c\/li\u003e\n\u003cli\u003eFor floating floors on underfloor heating panels\u003c\/li\u003e\n\u003cli\u003eCutting lines for easy cutting\u003c\/li\u003e\n\u003cli\u003eNo additional sealing tape required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNote on variants\u003c\/h3\u003e\n\u003cp\u003eNordic Fos supplies NordicFlex individually per pack of 6 m². The price applies per pack; the unit price per m² is shown with the price.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe surface is now aluminium coloured instead of red. According to Nordic Fos, the properties are unchanged.\u003c\/li\u003e\n\u003cli\u003eTechnical information according to the manufacturer Nordic Fos, details are given in the data sheet under Downloads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer: Nordic Fos A\/S, A. P. Møllers Allé 55, 2791 Dragør, Denmark, info@nordicfos.com, www.nordicfos.com\u003c\/p\u003e","brand":"Nordic Fos","offers":[{"title":"1 pack of 6 m²","offer_id":55445398389077,"sku":"14316","price":35.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1247\/2405\/files\/nordic-fos-nordicflex-trittschalldaemmung-aluminiumfarben.jpg?v=1792510982"}],"url":"https:\/\/wohnungstechnik.de\/en\/collections\/fussbodenheizung.oembed","provider":"Wohnungstechnik.de","version":"1.0","type":"link"}